Construction. The MD series is a full size machine designed for high sample out put. The Phoenix uses a modular system of construction so that whether your analysis program calls for 60,000 or 1000 samples per annum there is a Phoenix model whose design has been optimised to do just that.

Operation. Samples are dissolved and mixed into a lithium borate flux at temperatures ranging from 300 to 1600 degrees Celsius. (Typical fusion temperature is 1050 degrees Celsius) This is done over oxygen-enriched flames using specially designed burners. The Mouldable machine uses a mould which incorporates a crucible shape. The mixing and moulding is done in the mouldable. When mixing is complete the molten material is cooled in the mouldable. The bead is then removed using a suction cup or similar.

FEATURES:

INDIVIDUAL BURNER SELECTION VARIABLE SPEED SWIRL ACTION FULLY REGULATED AIR COOLING (2 STAGE) RESET AT ANY TIME CAN BE USED AT HIGH ALTITUDE WITHOUT MODIFICATION

SEPARATE MOULD HEATING AND TIMING CAN HEAT MOULDS UP TO 180GM AUTO-LOCK CRUCIBLE HOLDERS ADJUSTABLE POUR & MOULD DELAY INDIVIDUAL BURNER MANIFOLDS

 

DESCRIPTION	No of BURNERS	No of SAMPLES PRODUCED
PHOENIX 4000/MD	4 BURNERS	4 Glass Discs
PHOENIX 6000/MD	6 BURNERS	6 Glass Discs
PHOENIX 8000/MD	8 BURNERS	8 Glass Discs

 

APPLICATIONS
Glass and ceramics industry. Bauxite/Alumina. Mineral sands industry. slag's, mattes sinters etc.
The steel industry, analysing iron ores, blast furnace slags and even magnesites.
. Base metal (Pb, Zn, Cu, Ni) for the analysis of sulphides concentrates,

Geologocial and Exploration materials: aluminosilicates, carbonate etc.

. The cement industry, analysing sand, limestone, kiln feed, clinker, milled meal etc..
AFT machines have also been used to successfully fuse Ferro alloy powders.